Undead for you
Select messages from
#
through
#
Forum FAQ
[
/[
Print
]\
]
Bad Karma
->
General Technology
#1:
Undead for you
Author:
Oxfurd
,
Posted: Wed Jul 22, 2009 3:35 pm
—
Go to the Start menu
Open your CMD promt
Once in the CMD
type the following
ipconfig /release all
ipconfig /flushdns
ipconifg /renew all
This will flush any bad DNs cache on the local machine. Also you may have a good amount of Maleware.
What stuff are you using to counteract these?
#2:
Re: Undead for you
Author:
Bullitt
,
Location: Out There, USA
Posted: Wed Jul 22, 2009 9:07 pm
—
With ipconfig /release all I get "The operation failed as no adapter is in the state permissible for this operation" Should this be done in my router?
As far as Malware I don't have a problem with it. My firewall is on, I use CCleaner about two times a week, SpyBot every other day (before gaming) and Virus scan once a week. Any suggestions for Malware protection? Especially free.
#3:
Re: Undead for you
Author:
Oxfurd
,
Posted: Wed Jul 22, 2009 9:44 pm
—
OK also i will say you need one more items .
Malewarebytes.org ..
Also free please get that.
As for the Operation failed Few things you have XP. ?
#4:
Re: Undead for you
Author:
Oxfurd
,
Posted: Wed Jul 22, 2009 9:51 pm
—
Also Dont forget to do this operation at the end in the CMD prompt
/ipconfig /registerdns
Impsrtant
#5:
Re: Undead for you
Author:
DiZastur
,
Location: Victoria, BC, Canada
Posted: Wed Jul 22, 2009 9:55 pm
—
Weird, I can't see an initial post with the details on this. Sounds like your TCP stack is corrupted. Try the following...
In a command prompt type
netsh winsock reset catalog
and enter
Then type
netsh int ip reset reset.txt
and enter
Reboot
This will reset your network stack fixing your winsock issues. If there's anything else wrong, cross that bridge after this fix.
Note: If you have a software firewall or other 3rd party (non-Windows) protection software and experience problems after this, re-installing the applications from scratch is advisable.
#6:
Re: Undead for you
Author:
Bullitt
,
Location: Out There, USA
Posted: Wed Jul 22, 2009 11:11 pm
—
Running Win7 RC
#7:
Re: Undead for you
Author:
DiZastur
,
Location: Victoria, BC, Canada
Posted: Thu Jul 23, 2009 12:08 am
—
Rc7....hmmmm
I just recalled that I had a similar error when I installed vista64 on a machine I built for a co-worker awhile back. After much hairpulling (figuratively speaking, I'm bald
) I managed to resolve this.
Since i can't see an initial post describing the problem, could you answer a couple questions for me? If you run ipconfig in cmd prompt, what IP address do you get? Also, what make and model of router do you have?
EDIT - Er...I hope you don't mind me barging in to offer help. I can't help but wonder what problem prompted this thread. I saw you have this error message "The operation failed as no adapter is in the state permissible for this operation" on address renewal attempt. Normally this would be associated with an inability to get online, but I see Bullitt playing on the server now so either it's fixed or I'm missing something here, lol.
#8:
Re: Undead for you
Author:
Oxfurd
,
Posted: Thu Jul 23, 2009 12:32 am
—
No this is to just clean The ip/dns .. Didnt think to use the Netsh
But i doubt its the issue . But use it .
#9:
Re: Undead for you
Author:
Bullitt
,
Location: Out There, USA
Posted: Thu Jul 23, 2009 11:13 pm
—
My router issued .146 for my IP. Even after the errors it all works and my connection speed is slightly better but my pings to the server are much lower. Average 40-50 on server one. I was in the 70"s. Not sure if it makes a difference. I have a Linksys WRT54G with a DD-WRT V24sp1 bios flash. By the way my version of Win7RC1 is 64bit. Forgot to mention that.
Bad Karma
->
General Technology
output generated using
printer-friendly topic mod
.
All times are GMT
Page
1
of
1